Send Message
Home > products > Audio Power Amplifier >
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W

2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W

Dj Stereo Power Amplifier

2U Stereo Power Amplifier

Class TD Power Amplifier 600W

Place of Origin:

Guangdong, China

Brand Name:

VATASA

Model Number:

H-6/H-8/H-10

Contact Us
Request A Quote
Product Details
Type:
Professional Amplifier
Channels:
2 (2.0)
Product Name:
2*600W 2*800W 2*1000W Class TD 2U Dj Amplifier Stereo Amplifier
Item No:
H-6/H-8/H-10
Frequency Response:
20Hz-20kHz,±1dB
Power Handling:
2*600W/2*800W/2*1000W
Input Sensitivity:
0.775V
Signal To Noise Ratio:
≥95dB
Input Impedance:
20kΩ/Balanced, 10kΩ/un-Balanced
Nominal Impedance:
Distortion:
≤ 0.03%
Power Supply:
AC: 220-230V 50Hz
Payment & Shipping Terms
Minimum Order Quantity
2 pieces
Price
$100.00/pieces
Packaging Details
soft bubble inside,thick carton outside
Product Description
Product Description

Factory Price 2*600W 2*800W 2*1000W Class TD 2U Dj Amplifier Stereo Amplifier

 
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 0
1.Mains Power Switch
When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a
clicking denote that soft start finished. And more 1-2 seconds later, there will be another “clicking”, the amplifier
is connected with speaker and ready to work.
2.CH-1/CH-2 Input level control
Adjust it to get the volume desired. Use CH-1 control only while amplifier is set in Bridge or Parallel mode.
3.Signal LED
The green signal led indicates that a music signal
is present at this channel input.
4.CH-1/CH-2 Protection indicating LED
This red LED will light up when the amplifier is running un-stable or went in to thermal protection after the power
elements temperature over 90℃.
5.Clip LED
Turns on just before the maximum, distortion free, output level of the amplifier. The clip leds may turn on shortly from time to time but they may certainly not turn on for longer periods. In this case you have to turn the output level down!
6.Bridge mode indicating LED
Indicate the amplifier is working under BRIDGE mode, the
indicator is lighten , and the input signal only acts on CH-1
7.Parallel mode indicating LED
Indicate that the amplifier is working under parallel mode,
the indicator is lighten, input signal only acts on CH-1.
8.Stereo mode indicating LED
These green LED will light up while the input signal is
connected, the amplifier is working under stereo mode.
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 1
1.MAINS POWER SUPPLY CORD
2.CH-1/CH-2 SPEAKON OUTPUT
Used by a standard SPEAKON connector.
3.CH-1/CH-2 BINDING POST OUTPUT
Used by a standard binding connector.
4. OUTPUT MODE SET SWITCH.
BRIDGE MONO MODE. Sends CH-1 signals out-of-phase to CH-2,producing twice the normal voltage swing
between the two RED speaker terminals (CH-1 RED is defined as positive).Only CH-1 controls and input are
effective.
STEREO MODE. Each channel operates independently.as usual.
PARALLEL INPUT MODE. Sends CH-1 signals out CH-2,Only CH 1 controls and input are effective.
NOTE: speaker connections work as usual,Never connect the red output terminals directly together.
5. CH-1/CH-2 XLR INPUT CONNECTOR
Standard XLR (male) socket for input signal link.
Pin1: signal ground, Pin2: signal+, Pin3: signal-
6. CH-1/CH-2 XLR OUTPUT CONNECTOR
 
Specification
 
                     H-6
                        H-8
                      H-10
Power handling
600W*2(8Ω)/900W*2(4Ω)
800W*2(8Ω)/1200W*2(4Ω)
1000W*2(8Ω)/1500W*2(4Ω)
Signal to noise ratio
≥ 95dB
≥ 95dB
≥ 95dB
Output interface
Speakon and Binding
Speakon and Binding
Speakon and Binding
Input sensitivity
0.775V
0.775V
0.775V
Input impedance
20kΩ/Balanced,10kΩ/un-Balanced
20kΩ/Balanced,10kΩ/un-Balanced
20kΩ/Balanced,10kΩ/un-Balanced
Distortion
≤ 0.03%
≤ 0.03%
≤ 0.03%
F=1KHz 8 OHMS
> 240
> 240
> 240
Frequency response
20Hz-20kHz, ±1dB
20Hz-20kHz, ±1dB
20Hz-20kHz, ±1dB
Power supply
AC: 220-230V 50Hz
AC: 220-230V 50Hz
AC: 220-230V 50Hz
NW(kg)
10.6
12.4
13.5
Size(w*d*h)
482*326*88mm
482*326*88mm
482*326*88mm
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 2
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 3
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 4
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 5
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 6
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 7
2U Dj Class TD Stereo Power Amplifier 2*600W / 2*800W / 2*1000W 8

Send your inquiry directly to us

Privacy Policy China Good Quality Line Array Speaker Supplier. Copyright © 2024 vatasa-audio.com . All Rights Reserved.