DC112 Line Array System Top Quality Single 12-Inch Passive Line Array
DC112 is a two-way line array speaker with high power and high transient response. It provides a frequency range of 59Hz-20kHz(-10dB). With the processor, it improves the frequency response line and subjective sense of the vocal. It brings the ultimate experience to system engineers and tuners. DC112 consists of a 75-core voice coil ferrite tweeter and a 12-inch Neodymium cone low driver to constitute a large dynamic sound reinforcement system.
DC112’s high driver uses a wide directivity horn and has a longer range. It is beneficial to expand the wider mid-range and tweeter directivity. It uses a Neodymium low driver with a 3-inch voice coil and paper cone that are rigidly combined so that it has faster transients and better control. Not only can improve the sensitivity of the driver, but also can strengthen the low-frequency. The whole speaker can reach the sensitivity of about 97dB with the DSP optimized. So it enables the speaker to produce a peak sound pressure level output of 129dB.
The cabinet is made of 15mm plywood, and the surface is made of wear-resistant black matt paint. On both sides of the cabinet, two handles are flush with the box and are installed on both sides of the box for easy transportation. the back wiring board has 2 NL-4 four-pin sockets, with a connection way of 1+1-...Full Range, 2+2-pin. The rotatable LOGO is more suitable for the use of any angle of the speaker. The black perforated iron mesh sound-permeable gauze mesh effectively prevents moisture, and dust and protects the speaker unit.
